modules: remove .cache.mk on make clean

Remove .cache.mk inside vmmon-only and vmnet-only when executing
"make clean". This file can cause issues when upgrading gcc as make will
still look for includes inside older gcc includes directory.

File .cache.mk with cache of generated variables was created by build since
kernel v4.15-rc1, commit 3298b690b21c ("kbuild: Add a cache for generated
variables") until the feature was removed in v4.18-rc1, commit e08d6de4e532
("kbuild: remove kbuild cache").

vmmon-only/Makefile.kernel

@@ -31,7 +31,7 @@ $(DRIVER)-y := $(subst $(SRCROOT)/, , $(patsubst %.c, %.o, \
 		$(SRCROOT)/bootstrap/*.c)))
 
 clean:
-	rm -rf $(wildcard $(DRIVER).mod.c $(DRIVER).ko .tmp_versions \
+	rm -rf $(wildcard $(DRIVER).mod.c $(DRIVER).ko .tmp_versions .cache.mk \
 		Module.symvers Modules.symvers Module.markers modules.order \
 		$(foreach dir,linux/ common/ vmcore/ bootstrap/ \
 		./,$(addprefix $(dir),.*.cmd .*.o.flags *.o)))

vmmon-only/common/crosspage.c

@@ -139,7 +139,7 @@ CPDATA const VMCrossPageData cpDataTemplate = {
 
    .monTask.IOMapBase = sizeof(Task64),
 
-   .monGDTR.limit  = GDT_LIMIT,
+   .monGDTR.limit  = VMMON_GDT_LIMIT,
    .monGDTR.offset = GDT_START_VA,
 
    .shadowDR[6].ureg64 = DR6_DEFAULT,

vmmon-only/include/segs.h

@@ -51,14 +51,14 @@
  * it can use a single cross GDT).
  */
 
-#define GDT_SIZE              (sizeof(Descriptor) * NUM_VALID_SEGMENTS)
-#define GDT_LIMIT             (GDT_SIZE - 1)
+#define VMMON_GDT_SIZE        (sizeof(Descriptor) * NUM_VALID_SEGMENTS)
+#define VMMON_GDT_LIMIT       (VMMON_GDT_SIZE - 1)
 
 #define IRB_SIZE              32 /* Interrupt redirection bitmap. */
 #define TSS_SIZE              (sizeof(Task64) + IRB_SIZE)
 
 #define GDT_START_VA          (VPN_2_VA(GDT_AND_TASK_START))
-#define TASK_START_VA         (VPN_2_VA(GDT_AND_TASK_START) + GDT_SIZE)
+#define TASK_START_VA         (VPN_2_VA(GDT_AND_TASK_START) + VMMON_GDT_SIZE)
 
 /*
  * vmkBoot uses some of the lower-numbered segments, as do host kernels on

vmmon-only/include/vm_assert.h

@@ -67,6 +67,7 @@ extern "C" {
 #if defined (VMKPANIC) 
 #include "vmk_assert.h"
 #else /* !VMKPANIC */
+#include <linux/kernel.h>
 #define _ASSERT_PANIC(name) \
            Panic(_##name##Fmt "\n", __FILE__, __LINE__)
 #define _ASSERT_PANIC_BUG(bug, name) \
@@ -107,7 +108,7 @@ NORETURN void Panic_NoSave(const char *fmt, ...) PRINTF_DECL(1, 2);
 } while(0)
 
 #else
-NORETURN void Panic(const char *fmt, ...) PRINTF_DECL(1, 2);
+#define Panic panic
 #endif
 
 void LogThrottled(uint32 *count, const char *fmt, ...) PRINTF_DECL(2, 3);

vmmon-only/include/x86_basic_defs.h

@@ -35,6 +35,8 @@
 #define INCLUDE_ALLOW_VMCORE
 #include "includeCheck.h"
 
+#include <asm/processor-flags.h>
+
 #define X86_MAX_INSTR_LEN  15   /* Max byte length of an x86 instruction. */
 
 #define NUM_IDT_VECTORS 256
@@ -75,7 +77,9 @@
 #define CR3_PDB_MASK   0xfffff000
 #define CR3_IGNORE     0xFFF
 #define PAE_CR3_IGNORE 0x1F
+#ifndef CR3_PCID_MASK
 #define CR3_PCID_MASK  0xFFF
+#endif
 #define CR3_NO_FLUSH   (1ULL << 63)
 
 #define CR4_VME        0x00000001

vmmon-only/include/x86msr.h

@@ -24,6 +24,7 @@
 
 #ifndef _X86MSR_H_
 #define _X86MSR_H_
+#include <asm/msr-index.h>
 #define INCLUDE_ALLOW_USERLEVEL
 #define INCLUDE_ALLOW_VMX
 
@@ -151,7 +152,9 @@ MSRQuery;
 #define MSR_TSX_CTRL_RTM_DISABLE                  (1ULL << 0)
 #define MSR_TSX_CTRL_CPUID_CLEAR                  (1ULL << 1)
 
+#ifndef MSR_MISC_FEATURES_ENABLES
 #define MSR_MISC_FEATURES_ENABLES            0x140
+#endif
 
 /* Intel Core Architecture and later: use only architected counters. */
 #define IA32_MSR_PERF_CAPABILITIES                   0x345
@@ -712,7 +715,11 @@ typedef unsigned char MTRRType;
 /*
  * MISC_FEATURES_ENABLES bits
  */
+#ifdef MSR_MISC_FEATURES_ENABLES_CPUID_FAULT
+#define MSR_MISC_FEATURES_ENABLES_CPUID_FAULTING MSR_MISC_FEATURES_ENABLES_CPUID_FAULT
+#else
 #define MSR_MISC_FEATURES_ENABLES_CPUID_FAULTING 1
+#endif
 
 
 

vmmon-only/linux/driver.c

@@ -1257,7 +1257,7 @@ LinuxDriver_Ioctl(struct file *filp,    // IN:
       }
 
    case IOCTL_VMX86_WRITE_PAGE: {
-#if VMX86_DEVEL
+#ifdef VMX86_DEVEL
          VMMReadWritePage req;
 
          retval = HostIF_CopyFromUser(&req, ioarg, sizeof req);

vmnet-only/Makefile.kernel

@@ -32,6 +32,6 @@ $(DRIVER)-y := driver.o hub.o userif.o netif.o bridge.o procfs.o smac_compat.o \
 ####
 
 clean:
-	rm -rf $(DRIVER).o $(DRIVER).mod.o $(DRIVER).mod.c $(DRIVER).ko \
+	rm -rf $(DRIVER).o $(DRIVER).mod.o $(DRIVER).mod.c $(DRIVER).ko .cache.mk \
 	       .tmp_versions Module.symvers Modules.symvers Module.markers \
 	       modules.order $($(DRIVER)-y) .*.cmd .*.o.flags

vmnet-only/vm_device_version.h

@@ -35,6 +35,8 @@
 #endif
 #endif
 
+#include <linux/pci_ids.h>
+
 /* LSILogic 53C1030 Parallel SCSI controller
  * LSILogic SAS1068 SAS controller
  */
@@ -53,7 +55,10 @@
  *    VMware HD Audio codec
  *    VMware HD Audio controller
  */
+#ifndef PCI_VENDOR_ID_VMWARE
 #define PCI_VENDOR_ID_VMWARE                    0x15AD
+#endif
+
 #define PCI_DEVICE_ID_VMWARE_SVGA3              0x0406
 #define PCI_DEVICE_ID_VMWARE_SVGA2              0x0405
 #define PCI_DEVICE_ID_VMWARE_SVGA               0x0710
@@ -71,7 +76,11 @@
 #define PCI_DEVICE_ID_VMWARE_1394               0x0780
 #define PCI_DEVICE_ID_VMWARE_BRIDGE             0x0790
 #define PCI_DEVICE_ID_VMWARE_ROOTPORT           0x07A0
+
+#ifndef PCI_DEVICE_ID_VMWARE_VMXNET3
 #define PCI_DEVICE_ID_VMWARE_VMXNET3            0x07B0
+#endif
+
 #define PCI_DEVICE_ID_VMWARE_PVSCSI             0x07C0
 #define PCI_DEVICE_ID_VMWARE_82574              0x07D0
 #define PCI_DEVICE_ID_VMWARE_AHCI               0x07E0