Compare commits

...
Author SHA1 Message Date
Michal Kubecek fdb45b6bc7 vmmon: avoid using alloc_vm_area() for crosspage allocation
Mainline commit 301fa9f2ddf7 ("mm: remove alloc_vm_area") in v5.10-rc1
removed alloc_vm_area() function used to allow allocating crosspage as
executable after vmap() started silently setting NX flag in kernel 5.8.

Similar to what upstream did in Xen code, use apply_to_page_range() to fix
the crosspage flags, except we don't need to use get_vm_area() which is not
exported. Thanks to virtualbox for the hint that current->mm can be used
instead of init_mm (which is not exported either).
2020-12-09 10:57:39 +01:00
Michal Kubecek def1fde011 vmmon: avoid kernel writes to eventfd
Starting with mainline commit 4d03e3cc5982 ("fs: don't allow kernel reads
and writes without iter ops") in 5.10-rc1, kernel writes are only allowed
for files providing ->write_iter() callback which eventfd does not.

As an attempt to address this issue on kernel side by providing
->write_iter() callback to eventfd was met with a pushback and it is
unlikely to be accepted any time soon, let's use a specific eventfd
interface eventfd_signal() instead. However, as the comments in
HostIF_SemaphoreSignal() indicate that the file descriptor may also be
a pipe (without telling when), let's keep kernel_write() as a fallback in
case the file descriptor is not eventfd.
2020-12-09 10:57:39 +01:00
Michal Kubecek dd89259952 vmnet: use new compat_csum_and_copy_to_user() calling convention
Part of bigger csum_and_copy rework, commit c693cc4676a0 ("saner calling
conventions for csum_and_copy_..._user()") in 5.10-rc1 drops last two
arguments and changes the way errors are reported.

Provide a compat wrapper with new calling convention and rewrite callers in
vmnet to use it. Unfortunately there doesn't seem to be a way to recognize
which calling convention kernel has so version check is used.
2020-12-09 10:57:39 +01:00
Michal Kubecek 5fc7cda4f9 vmmon: avoid set_fs() in HostIFFastClockThread()
The set_fs() function was dropped on x86_64 architecture by commit
47058bb54b57 ("x86: remove address space overrides using set_fs()") in
5.10-rc1. It's not clear what purpose does set_fs(KERNEL_DS) serve in
HostIFFastClockThread(); it was certainly needed for the old code using
functions expecting user pointers to access /dev/rtc but that code has been
dropped between Workstation 12.5.7 and 14.0.0 in September 2017.

Drop the temporary set_fs(KERNEL_DS) trick as there doesn't seem to be
a need for it any more.
2020-12-09 10:57:39 +01:00
Michal Kubecek d0483caf73 vmmon: avoid set_fs() in isVAReadable()
The set_fs() function was dropped on x86_64 architecture by commit
47058bb54b57 ("x86: remove address space overrides using set_fs()") in
5.10-rc1. In isVAReadable() it is used to check if a kernel address can be
read from without risking a pagefault if the answer is negative by using
set_fs() to pretend it's a userspace address and checking with
copy_from_user(). Starting with 5.8, copy_from_kernel_nofault() does can be
used to copy from a kernel address with access check but without an actual
pagefault.
2020-12-09 10:57:39 +01:00
Michal Kubecek c9739c0fff vmmon: avoid set_fs() in HostIF_SemaphoreWait() and HostIF_SemaphoreSignal()
The set_fs() function was dropped on x86_64 architecture by commit
47058bb54b57 ("x86: remove address space overrides using set_fs()") in
5.10-rc1. In HostIF_SemaphoreWait() it is used to allow calling read() file
op on a kernel pointer, in HostIF_SemaphoreSignal() to allow calling
write() file op on a kernel pointer. This is only the case for pre-5.8
kernels as we need to use kernel_read() and kernel_write() helpers on 5.8
and newer anyway.

Use kernel_read() and kernel_write() always, like Workstation 16.0.0 does,
so that we no longer need the set_fs(KERNEL_DS) trick. Make the code of
both functions look exactly like in Workstation 16.0.0 to make future
backports easier.
2020-12-09 10:57:39 +01:00
Jan Andres 9cbb077f8d Fix NULL pointer dereference in eventfd read call
Starting with commit 12aceb89b0bc ("eventfd: convert to f_op->read_iter()")
in 5.8-rc1, the "read" function pointer in eventfd's file_operations is
NULL, "read_iter" is available instead.

Use kernel_read() and kernel_write() instead of directly calling the
function pointers to handle this correctly. We can do that safely for
kernel 4.14 and newer (older versions have different arguments of
kernel_read() and kernel_write()).
2020-09-19 21:58:43 +02:00
Jan Andres 4e40ef62ee Fix NX bit handling for Linux 5.8+
Do not use vmap() to map the cross page, it needs to be executable and
vmap() unconditionally sets the NX bit starting with commit cca98e9f8b5e
("mm: enforce that vmap can't map pages executable") in 5.8-rc1.

Emulate previous behavior of vmap() by using alloc_vm_area() and
explicitly setting the PTE.
2020-09-19 21:58:43 +02:00
Michal Kubecek 11bf1a7d96 vmmon: include <asm/irq_vectors.h> explicitly
After mainline commit 13c01139b171 ("x86/headers: Remove APIC headers from
<asm/smp.h>") in 5.9-rc1, APIC headers are no longer included via
<asm/smp.h> so that linux/hostif.c will lack the definition of
SPURIOUS_APIC_VECTOR.

Include <asm/irq_vectors.h> in linux/hostif.c explicitly to avoid that.
2020-08-20 11:17:17 +02:00
Michal Kubecek f3b55e5bca vmmon: handle change of vmstat slab counters to bytes
Mainline commit d42f3245c7e2 ("mm: memcg: convert vmstat slab counters to
bytes") in kernel 5.9-rc1 changed vmstat accounting of slab to byte
counters. Unfortunately there doesn't seem to be any obvious way to check
for this change except version check.
2020-08-20 10:20:07 +02:00
2 changed files with 122 additions and 51 deletions

No files matched your search

+97 -40
View File
@@ -47,13 +47,16 @@
#include <asm/asm.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/tlbflush.h>
#include <asm/uaccess.h>
#include <asm/irq_vectors.h>
#include <linux/capability.h>
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/hrtimer.h>
#include <linux/signal.h>
#include <linux/taskstats_kern.h> // For linux/sched/signal.h without version check
#include <linux/eventfd.h>
#include "vmware.h"
#include "x86apic.h"
@@ -603,6 +606,15 @@ HostIF_FastClockUnlock(int callerID) // IN
MutexUnlock(&fastClockMutex, callerID);
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 8, 0)
static int crosspage_set_exec(pte_t *pte, unsigned long addr, void *data)
{
struct page *p = data;
set_pte(pte, mk_pte(p, VM_PAGE_KERNEL_EXEC));
return 0;
}
#endif
/*
*----------------------------------------------------------------------
@@ -623,7 +635,29 @@ HostIF_FastClockUnlock(int callerID) // IN
static void *
MapCrossPage(struct page *p) // IN:
{
#if COMPAT_LINUX_VERSION_CHECK_LT(5, 8, 0)
return vmap(&p, 1, VM_MAP, VM_PAGE_KERNEL_EXEC);
#else
void *addr;
addr = vmap(&p, 1, VM_MAP, VM_PAGE_KERNEL_EXEC);
if (!addr)
return NULL;
/* Starting with 5.8, vmap() always sets the NX bit, but the cross
* page needs to be executable. */
if (apply_to_page_range(current->mm, (unsigned long)addr, PAGE_SIZE,
crosspage_set_exec, p)) {
vunmap(addr);
return NULL;
}
preempt_disable();
__flush_tlb_all();
preempt_enable();
return addr;
#endif
}
@@ -1529,8 +1563,11 @@ HostIF_EstimateLockedPageLimit(const VMDriver* vm, // IN
#else
lockedPages += global_page_state(NR_PAGETABLE);
#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 9, 0)
/* NR_SLAB_* converted to byte counters in 5.9 */
lockedPages += global_node_page_state_pages(NR_SLAB_UNRECLAIMABLE_B);
#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 13, 0)
/* NR_SLAB_* moved from zone to node in 4.13. */
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 13, 0)
lockedPages += global_node_page_state(NR_SLAB_UNRECLAIMABLE);
#else
lockedPages += global_page_state(NR_SLAB_UNRECLAIMABLE);
@@ -1990,6 +2027,27 @@ HostIF_VMLockIsHeld(VMDriver *vm) // IN
#if defined(CONFIG_SMP) || defined(CONFIG_X86_UP_IOAPIC) || \
defined(CONFIG_X86_UP_APIC) || defined(CONFIG_X86_LOCAL_APIC)
#if COMPAT_LINUX_VERSION_CHECK_LT(5, 8, 0)
static long compat_copy_from_kernel_nofault(void *dst, VA src, size_t size)
{
mm_segment_t old_fs;
long ret;
old_fs = get_fs();
set_fs(KERNEL_DS);
ret = HostIF_CopyFromUser(dst, src, size);
set_fs(old_fs);
return ret;
}
#else
static long compat_copy_from_kernel_nofault(void *dst, VA src, size_t size)
{
return copy_from_kernel_nofault(dst, (const void *)src, size);
}
#endif
/*
*----------------------------------------------------------------------
*
@@ -2009,15 +2067,11 @@ HostIF_VMLockIsHeld(VMDriver *vm) // IN
static Bool
isVAReadable(VA r) // IN:
{
mm_segment_t old_fs;
uint32 dummy;
int ret;
long ret;
old_fs = get_fs();
set_fs(KERNEL_DS);
r = APICR_TO_ADDR(r, APICR_VERSION);
ret = HostIF_CopyFromUser(&dummy, r, sizeof dummy);
set_fs(old_fs);
ret = compat_copy_from_kernel_nofault(&dummy, r, sizeof(dummy));
return ret == 0;
}
@@ -2203,44 +2257,41 @@ HostIF_SemaphoreWait(VMDriver *vm, // IN:
uint64 *args) // IN:
{
struct file *file;
mm_segment_t old_fs;
int res;
int waitFD = args[0];
int timeoutms = args[2];
uint64 value;
struct poll_wqueues table;
unsigned int mask;
file = vmware_fget(waitFD);
if (file == NULL) {
return MX_WAITERROR;
}
old_fs = get_fs();
set_fs(KERNEL_DS);
{
struct poll_wqueues table;
unsigned int mask;
poll_initwait(&table);
current->state = TASK_INTERRUPTIBLE;
mask = compat_vfs_poll(file, &table.pt);
if (!(mask & (POLLIN | POLLERR | POLLHUP))) {
vm->vmhost->vcpuSemaTask[vcpuid] = current;
schedule_timeout(timeoutms * HZ / 1000); // convert to Hz
vm->vmhost->vcpuSemaTask[vcpuid] = NULL;
}
current->state = TASK_RUNNING;
poll_freewait(&table);
poll_initwait(&table);
current->state = TASK_INTERRUPTIBLE;
mask = compat_vfs_poll(file, &table.pt);
if (!(mask & (POLLIN | POLLERR | POLLHUP))) {
vm->vmhost->vcpuSemaTask[vcpuid] = current;
schedule_timeout(timeoutms * HZ / 1000); // convert to Hz
vm->vmhost->vcpuSemaTask[vcpuid] = NULL;
}
current->state = TASK_RUNNING;
poll_freewait(&table);
/*
* Userland only writes in multiples of sizeof(uint64). This will allow
* the code to happily deal with a pipe or an eventfd. We only care about
* reading no bytes (EAGAIN - non blocking fd) or sizeof(uint64).
*
* Upstream Linux changed the function parameter types/ordering in 4.14.0.
*/
res = file->f_op->read(file, (char *) &value, sizeof value, &file->f_pos);
#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 0)
res = kernel_read(file, file->f_pos, (char *)&value, sizeof value);
#else
res = kernel_read(file, &value, sizeof value, &file->f_pos);
#endif
if (res == sizeof value) {
res = MX_WAITNORMAL;
} else {
@@ -2249,7 +2300,6 @@ HostIF_SemaphoreWait(VMDriver *vm, // IN:
}
}
set_fs(old_fs);
fput(file);
/*
@@ -2332,8 +2382,8 @@ HostIF_SemaphoreForceWakeup(VMDriver *vm, // IN:
int
HostIF_SemaphoreSignal(uint64 *args) // IN:
{
struct eventfd_ctx *eventfd;
struct file *file;
mm_segment_t old_fs;
int res;
int signalFD = args[1];
uint64 value = 1; // make an eventfd happy should it be there
@@ -2343,22 +2393,34 @@ HostIF_SemaphoreSignal(uint64 *args) // IN:
return MX_WAITERROR;
}
old_fs = get_fs();
set_fs(KERNEL_DS);
/*
* If it's eventfd, use specific eventfd interface as kernel writes
* to eventfd may not be allowed in kernel 5.10 and later.
*/
eventfd = eventfd_ctx_fileget(file);
if (!IS_ERR(eventfd)) {
eventfd_signal(eventfd, 1);
fput(file);
return MX_WAITNORMAL;
}
/*
* Always write sizeof(uint64) bytes. This works fine for eventfd and
* pipes. The data written is formatted to make an eventfd happy should
* it be present.
*
* Upstream Linux changed the function parameter types/ordering in 4.14.0.
*/
res = file->f_op->write(file, (char *) &value, sizeof value, &file->f_pos);
#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 0)
res = kernel_write(file, (char *)&value, sizeof value, file->f_pos);
#else
res = kernel_write(file, &value, sizeof value, &file->f_pos);
#endif
if (res == sizeof value) {
res = MX_WAITNORMAL;
}
set_fs(old_fs);
fput(file);
/*
@@ -2877,12 +2939,9 @@ static int
HostIFFastClockThread(void *unused) // IN:
{
int res;
mm_segment_t oldFS;
unsigned int rate = 0;
unsigned int prevRate = 0;
oldFS = get_fs();
set_fs(KERNEL_DS);
allow_signal(SIGKILL);
while ((rate = linuxState.fastClockRate) > MIN_RATE) {
@@ -2905,8 +2964,6 @@ HostIFFastClockThread(void *unused) // IN:
}
out:
set_fs(oldFS);
/*
* Do not exit thread until we are told to do so.
*/
+25 -11
View File
@@ -111,6 +111,24 @@ static unsigned int compat_skb_frag_off(const skb_frag_t *frag)
#define write_access_ok(addr, size) access_ok(addr, size)
#endif
#if COMPAT_LINUX_VERSION_CHECK_LT(5, 10, 0)
static inline
__wsum compat_csum_and_copy_to_user(const void *src, void __user *dst, int len)
{
int err;
__wsum ret;
ret = csum_and_copy_to_user(src, dst, len, 0, &err);
return err ? 0 : ret;
}
#else
static inline
__wsum compat_csum_and_copy_to_user(const void *src, void __user *dst, int len)
{
return csum_and_copy_to_user(src, dst, len);
}
#endif
/*
*-----------------------------------------------------------------------------
*
@@ -563,7 +581,6 @@ VNetCsumCopyDatagram(const struct sk_buff *skb, // IN: skb to copy
char *buf) // OUT: where to copy data
{
unsigned int csum;
int err = 0;
int len = skb_headlen(skb) - offset;
char *curr = buf;
const skb_frag_t *frag;
@@ -576,10 +593,9 @@ VNetCsumCopyDatagram(const struct sk_buff *skb, // IN: skb to copy
return -EINVAL;
}
csum = csum_and_copy_to_user(skb->data + offset, curr, len, 0, &err);
if (err) {
return err;
}
csum = compat_csum_and_copy_to_user(skb->data + offset, curr, len);
if (!csum)
return -EFAULT;
curr += len;
for (frag = skb_shinfo(skb)->frags;
@@ -590,14 +606,12 @@ VNetCsumCopyDatagram(const struct sk_buff *skb, // IN: skb to copy
const void *vaddr;
vaddr = compat_kmap_frag(frag);
tmpCsum = csum_and_copy_to_user(vaddr + compat_skb_frag_off(frag),
curr, compat_skb_frag_size(frag), 0,
&err);
tmpCsum = compat_csum_and_copy_to_user(vaddr + compat_skb_frag_off(frag),
curr, compat_skb_frag_size(frag));
compat_kunmap_frag(frag);
if (err) {
return err;
}
if (!tmpCsum)
return -EFAULT;
csum = csum_block_add(csum, tmpCsum, curr - buf);
curr += compat_skb_frag_size(frag);
}