This flag was added on March 3, 2008 to comply with a specific vendor's
hardware limitations. This vendor is out of business, and with the
assumption of a software datapath backup, it is unlikely that a switch
would be unable to support sending to a physical port and the controller
simultaneously.
This commmit removes the corresponding spec text and replaces the
capability bit with a reserved one.
Thanks to Justin Pettit for the history.
added a human readable string to ofp_stats_desc to describe
the datapath, e.g., "switch4 in closet 3b of Gates"
* updated openflow.h
* updated udatapath: defaults to "$HOSTNAME pid=$$"
* updated kernel datapath: defaults to "$HOSTNAME idx=$i"
* updated wireshark plugin
* added regression test for ofp_desc_stats
* addressed KK's review comments from:
https://mailman.stanford.edu/pipermail/openflow-dev/2009-December/000545.html
send_flow_end was a hold-over from 0.8.x releases. Version 0.9 removed the
datapath-wide send flow mod expire flag and replaced it by a per-flow flag.
This field was used by the NetFlow code to force notification of expires.
When a switch receives a barrier message it must first complete all
commands sent before the barrier message before executing any commands
after it. When all commands before the Barrier message have completed,
it must send a barrier reply message back to the controller.
Remove monolithic OpenFlow switch.
Add userspace datapath.
Fix BUG#13: Revise check wildcards for in_port != out_port output
validation.
Fix BUG#30: Made use of get_jiffies_64 instead of jiffies.
Fix BUG#31: Fix NetFPGA crash in case of test_delete test harness run.
Fix BUG#32: Add stack depth limitation to avoid inifinite loop in
log_backtrace.
Fix BUG#33: Improve NetFPGA kernel extension and NetFPGA image to
support MAC address rewrite features (two actions) on NetFPGA enabled
OpenFlow switch.
Fix BUG#34: Add NetFPGA kernel extension source codes to create
distribution package with NetFPGA correctly.
Fix BUG#38: Improve regression test for FLOW_MOD ACTION SET_DL_SRC and
SET_DL_DST.
Fix BUG#39: Correct misunderstanding of byte order ops for OFPAT_XXX.
This makes it easier to install the headers, or to use them directly from
another software package with -I$(openflow)/include, without invading
the top-level include file namespace.
To enable SNAT, run configure with the "--enable-snat" flag. This has
only been tested with the 2.6.23 kernel...more diverse testing will follow.
Documentation and a cleaner build setup will also be in a future check-in.
If an invalid port index was used in dp_set_origin, the value of skb->dev
was left unchanged. This change causes skb->dev to be set to NULL in those
circumstances. This makes Packet Out and Add Flow messages that use a
buffer id behave like Packet Out without a buffer id.
Stripping VLANs is now done through the OFPAT_STRIP_VLAN action (i.e., you
don't specify a magic value in the generirc VLAN action). Also, it is now
possible to modify the priority bits associated with the VLAN tag through
the OFPAT_SET_VLAN_PCP action. The OFPAT_SET_DL_VLAN has been renamed to
OFPAT_SET_VLAN_VID.
This new OpenFlow message format provides a cleaner interface and greater
detail and control over ports. It is now possible to see what features
the switch's port is currently configured as having, what it's advertising,
and what it's capable of handling. It is also possible to return the
features advertised by the port's peer.
To report on link status and whether a port is administratively enabled or
disabled, the reference switches poll. This change uses the Linux kernel's
device notification system, so that polling isn't necessary.
The kernel datapath was claiming that it implements STP, which is untrue.
In fact, the secchan implements STP, so if the secchan was not running
the STP support did not work. Thus, "controller nl:0" would do the
wrong thing.
This makes the secchan edit the responses from the datapath to claim
STP support.
This updates the OpenFlow protocol version and changes the names of
structure members, so any software that uses OpenFlow will need to be
updated to match.
There was little point in taking the dp_mutex farther down in the
code than dp_genl_openflow, since that function is already completely
serialized by genl_rcv across the genl_mutex. We could get rid of
dp_mutex completely, except that we still need it to serialize timeout.
This has two notable omissions. First, only at most 4k of flow statistics
are reported. Second, aggregate statistics are not yet supported. Both
of these are fairly easily fixable, just not fixed yet.
We want to allow multiple OpenFlow connections to a switch, so that
dpctl and other management tools can also connect to a switch that
is connecte to the controller. These tools will want to fetch the
information in the data_hello message, but currently this can only
be done by sending a control_hello message, which changes the
switch configuration state. So breaking the hello messages up into
multiple different messages, only some of which affect configuration
state, cures the problem.
Also, clean up the kernel datapath a bit, by adding helper functions
for allocating and resizing Generic Netlink messages that encapsulate
OpenFlow messages.
This is required on the Quanta platform, which needs to down a semaphore
inside the timeout implementation.
Also, add a 2.4 compatibility implementation of kthread so that both
2.4 and 2.6 can use the kthread API.
Brandon Heller
Rob Sherwood
Glen Gibb
Mikio Hara
Ben Pfaff
Justin Pettit
Martin Casado