Files
ns-3-dev/examples/tap/tap-wifi-virtual-machine.py
T

107 lines
3.7 KiB
Python

# -*- Mode: Python; -*-
#
# Copyright 2010 University of Washington
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation;
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
import sys
import ns3
def main(argv):
#
# We are interacting with the outside, real, world. This means we have to
# interact in real-time and therefore we have to use the real-time simulator
# and take the time to calculate checksums.
#
ns3.GlobalValue.Bind("SimulatorImplementationType", ns3.StringValue("ns3::RealtimeSimulatorImpl"))
ns3.GlobalValue.Bind("ChecksumEnabled", ns3.BooleanValue("true"))
#
# Create two ghost nodes. The first will represent the virtual machine host
# on the left side of the network; and the second will represent the VM on
# the right side.
#
nodes = ns3.NodeContainer()
nodes.Create (2);
#
# We're going to use 802.11 A so set up a wifi helper to reflect that.
#
wifi = ns3.WifiHelper.Default()
wifi.SetStandard (ns3.WIFI_PHY_STANDARD_80211a);
wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager", "DataMode", ns3.StringValue ("wifia-54mbs"));
#
# No reason for pesky access points, so we'll use an ad-hoc network.
#
wifiMac = ns3.NqosWifiMacHelper.Default()
wifiMac.SetType ("ns3::AdhocWifiMac");
#
# Configure the physcial layer.
#
wifiChannel = ns3.YansWifiChannelHelper.Default()
wifiPhy = ns3.YansWifiPhyHelper.Default()
wifiPhy.SetChannel(wifiChannel.Create())
#
# Install the wireless devices onto our ghost nodes.
#
devices = wifi.Install(wifiPhy, wifiMac, nodes)
#
# We need location information since we are talking about wifi, so add a
# constant position to the ghost nodes.
#
mobility = ns3.MobilityHelper()
positionAlloc = ns3.ListPositionAllocator()
positionAlloc.Add(ns3.Vector(0.0, 0.0, 0.0))
positionAlloc.Add(ns3.Vector(5.0, 0.0, 0.0))
mobility.SetPositionAllocator(positionAlloc)
mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel")
mobility.Install(nodes)
#
# Use the TapBridgeHelper to connect to the pre-configured tap devices for
# the left side. We go with "UseLocal" mode since the wifi devices do not
# support promiscuous mode (because of their natures0. This is a special
# case mode that allows us to extend a linux bridge into ns-3 IFF we will
# only see traffic from one other device on that bridge. That is the case
# for this configuration.
#
tapBridge = ns3.TapBridgeHelper()
tapBridge.SetAttribute ("Mode", ns3.StringValue ("UseLocal"));
tapBridge.SetAttribute ("DeviceName", ns3.StringValue ("tap-left"));
tapBridge.Install (nodes.Get (0), devices.Get (0));
#
# Connect the right side tap to the right side wifi device on the right-side
# ghost node.
#
tapBridge.SetAttribute ("DeviceName", ns3.StringValue ("tap-right"));
tapBridge.Install (nodes.Get (1), devices.Get (1));
#
# Run the simulation for ten minutes to give the user time to play around
#
ns3.Simulator.Stop (ns3.Seconds (600));
ns3.Simulator.Run(signal_check_frequency = -1)
ns3.Simulator.Destroy()
return 0
if __name__ == '__main__':
sys.exit(main(sys.argv))