Fix and move Dockerfile to this repository

Change-Id: I07039719c82d3a727b108f7875f231cd6b79493d

.dockerignore

@@ -0,0 +1 @@
+Dockerfile

Dockerfile

@@ -0,0 +1,38 @@
+# Setup container with Ubuntu 20.04 image
+FROM ubuntu:20.04
+
+# Set the working directory to /
+WORKDIR /
+
+# expose ports for openvswitch-switch
+EXPOSE 6633 6653 6640
+
+# Update container image
+RUN apt-get update -y && \
+    apt-get autoremove -y && \
+    apt-get install --no-install-recommends -y \
+        lsb-release sudo \
+        zip unzip wget git ca-certificates \
+        curl iproute2 iputils-ping net-tools \
+        tcpdump vim x11-xserver-utils xterm && \
+        update-ca-certificates && \
+    alias python=python3
+
+RUN git clone --depth 1 https://github.com/mininet/mininet.git && \
+    cd mininet && ./util/install.sh && cd /
+
+COPY . /mini-ndn
+
+RUN cd mini-ndn && \
+    pip3 install -r requirements.txt && \
+    ./install.sh -y --ppa && cd /
+
+RUN rm -rf /var/lib/apt/lists/*
+
+COPY docker/ENTRYPOINT.sh /
+RUN chmod +x ENTRYPOINT.sh
+
+# Change the working directory to /mini-ndn
+WORKDIR /mini-ndn
+
+ENTRYPOINT ["/ENTRYPOINT.sh"]

docker/ENTRYPOINT.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+# set python3 alias, but needs permanent fix in image directly
+alias python=python3
+
+service openvswitch-switch start
+ovs-vsctl set-manager ptcp:6640
+
+bash
+
+service openvswitch-switch stop

docker/README.md

@@ -1,20 +1,12 @@
 
 [comments]: The original author of Mini-NDN docker is Md Ashiqur Rahman (marahman@email.arizona.edu)
 
-| :exclamation:  Mini-NDN docker is in experimental phase, it uses older version of Mini-NDN and is incompatible with the current version |
+### `docker build`
-|-----------------------------------------------------------------------------------------------------------------------------------------|
 
-### `docker build` or `docker pull`
+The Dockerfile can be used directly to `build` an image from scratch.
-
-The [Dockerfile](https://github.com/ashiqopu/docker-minindn/blob/master/Dockerfile) can be used directly to `build` an image from scratch.
 
 * Build with `Dockerfile`:
-  * Open terminal and use the following command:
+  * Clone the repository and type.
-    ```bash
-    git clone https://github.com/ashiqopu/docker-minindn
-    cd docker-minindn
-    ```
-  * Type and enter.
     ```bash
     docker build -t minindn .
     ```